Quick Answer: How Much Concrete Do I Need For A 20×30 Slab?

How much does it cost to pour a 20×30 slab?

Concrete Slab Cost CalculatorSize (in feet)Approximate Cost20x20$2,40024×24$3,46020×30$3,60025×25$3,75010 more rows.

How much is a truckload of concrete?

Full Truck Load of Concrete Cost One full truckload of concrete is about 10 cubic yards and costs between $1,169 and $1,444 depending on the PSI mix. Anything less than a full truckload is considered a short load which adds $53 per cubic yard to your final price.

How many inches of gravel do you need for a concrete slab?

Construct the form with 2×4 or 2×6 lumber and secure in place by wood stakes and deck screws. Excavate the slab area to a depth of about 7 inches, allowing 3 inches for a gravel base and 4 inches for concrete.

How many bags of concrete do I need for a 12×12 slab?

Enter the size of the slab you want to build in square feet. The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab. (All yields are approximate and do not include allowance for uneven subgrade, waste, etc.)

How much does 2 yards of concrete cost?

According to the NRMCA – Ready Mixed Concrete Industry Data Survey, the average cost of concrete in 2018 was $120 per cubic yard, or $240 for the 2 cubic yards needed for a typical 10-by-10-foot patio.

How many bags of cement do I need for 1 cubic meter?

Batching by volume – DIYMaterials0.2 m3 concrete1 m3 concretecement (no. 25 kg bags)2.512all-in aggregate (volume in m3)0.251.3water (volume in litres)32160cement (no. 25 kg bags)3.51410 more rows

How much concrete do I need for a 10×20 slab?

For a 10 x 10 slab, we’d suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

What is the difference between a concrete slab and a cement slab?

Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is basically a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement. Concrete gets stronger as it gets older.

Do you need rebar for 4 inch slab?

No, you do not need rebar for a 4-inch slab of concrete on grade. A 4-inch-thick slab cast on the ground and in permanent contact with it will float and rebar is not required. Rebar is recommended on concrete measuring 5 – 6 inches thick.

How many bags of concrete do I need for a 4×8 slab?

Your project is 32 square feet at a depth of 4”. Here is the quantity that you will need for your slab. Quikrete Concrete Mix: 24- 60lb bags.

How much area does a bag of concrete cover?

One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about . 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60-pound bags of concrete, divide 33.333 cubic feet by . 45 cubic feet to get 74.07 total bags of concrete.

How much does 30 yards of concrete cost?

Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost. There could be other fees for such things as Saturday concrete truck delivery and small loads.

Is it cheaper to pour concrete yourself?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. However, it is important to get the ratio right and to mix the concrete thoroughly.

How do you price concrete work?

A typical concrete slab costs $4 to $8 per square foot with most homeowners spending between $5.35 to $6.17 per square foot, or $113 to $126 per cubic yard for both materials and installation. Your final cost will depend on the slabs size, thickness, and if you any special reinforcement such as wire mesh or rebar.

How much concrete is needed for a slab?

For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards.